PC020003 Oven Door Hinge
You sometimes need PD020033 Screw to install the new hinge - https://www.allvikingparts.com/Screw_p/pd020033.h...
DOOR HINGE
REMOVAL
1-Remove door
2-Remove oven racks, rack supports, oven bottom
and inner side
wall.
3-Remove two (2) screws securing the hinge cover to
the oven side wall.
4-Open the hinge and lock in the most open position.
5-Remove the lower and upper Phillips head screws
(located behind the
oven gasket) securing the hinge
to the front
frame.
6-Remove the hinge to the inside of the oven by
pulling through
the hinge slot.
If you need help determining if this is the correct Viking Part for your Viking Appliance, just email us at [email protected] or call one of our Viking Part Pros at 888 988 4546.
